Prompt Mark And Cursor; Direct Execution Mode - Sanyo MBC-550 Series User Manual

Prompt Hark and Cursor
When the system enters key-in waiting state after the
Sanyo Basic activation or after an execution, the state
is called a Sanyo Basic mode. The Sanyo Basic mode
displays the following prompt mark:
Ready
> Cursor (blink)
Whenever the prompt mark is being displayed, Sanyo
Basic instruction (program) can be entered.
Direct Execution Mode
If a program statement without line number and RETURN
Key were entered while a prompt mark is being dis­
played, the entered statement is immediately executed.
This is called a direct execution,
result of the direct execution is stored in the memory,
although the instruction statement is deleted,
statement can also be directly executed.
The operation
Multi-
Examples
>A=3.14*5.8~2:PRINT A
105.63
>F0R 1=1 TO 5:PRINT I:NEXT I
1
2
3
4
5
3-4