How To Enter Sanyo Basic - Sanyo MBC-550 Series User Manual

HOW TO ENTER SAYNO BASIC
At the A: prompt of the operating system, enter:
BASIC [<filenan»>]
[/F:< number of files to be
Description
(1) <filename> is the Sanyo Basic program filename to
be executed after you enter Sanyo Basic When this is
specified, <file name> program is automatically loaded
and executed. If it was omitted, the system enters key-
in wait state after displaying prompt mark with Sanyo
Basic mode.
(2) <number of files to be used> defines the maximum
number of data files which are opened by a program at
one time. If this is omitted, the system assumes 3 as
its default value. The maximum number of files can be
opened at one time is 15 using Sanyo Basic. (The
system allocates the buffer area according to the
specified number of files.)
Example
>BASIC
>BASIC "PRGM-1"
>BASIC "PRGM-1" /F:5
3-3