Diskcopy Command; Single Drive Systems - Sanyo MBC-550 Series User Manual

DISKCOPY Command
You should make back up copies of all your files,
especially costly software.The DISKCOPY command copies
the contents of a disk onto another disk. DISKCOPY is
faster than COPY because it copies the entire contents
of a disk in one operation.
Single Drive Systems
For single drive systems, if you want to make a copy of
a disk, type:
DISKCOPY
The system will display:
Insert source diskette into drive A:<CR>
Insert formatted target diskettes into
drive A:(<CR»
Press any key when ready
Insert the disk to be copied
Remove the system disk,
and depress the RETURN key. Remove the disk after the
cursor drops to the second prompt . Insert a blank
formatted disk and depress the RETURN key. The files
will be read from memory on to the disk.
Note: If either of the disks you are using has defec­
tive tracks, DISKCOPY will not work. Use the COPY
command to back up your disks in these cases. The COPY
command will skip over defective tracks.
1-32