HP 9000 300 Series Hardware Configuration Manual page 80

Configuring Mass Storage Devices
Chapter Contents
• Accessing a Hard Disk Drive shows you how to remove a hard disk drive
from the controller. Their configuration jumpers are on the bottom .
• Jumper or switch settings for the:
o
52 Mbyte Hard Disk Drive
o
210 and 420 Mbyte Hard Disk Drives
o
CD ROM Disk Drive
o 3.5-in. Flexible Disk Drive
o
DDS Tape Drive
Note Your controller system may include mass storage or other
products not covered in this manual. Refer to that device's
manuals for configuration information.
6
Configuring Mass Storage Devices 6-1
6