HP 9000 300 Series Hardware Configuration Manual page 39

1
With Configuration Control menu in the upper-right corner of the screen, enter
2 [Return
J.
Configuration Control
Keys Control Class
1 I/O Configuration
2 Auto System Selection
A Abort without changes
Type [key] RETURN ?
2
This menu appears:
Auto System Selection
Keys Option Status
1 Scan for System Y
2 Selected System N
3 Store Selected Sys. N
E Execute
A Abort without changes
Type [key] RETURN
?
3
The prompt
?
indicates that your controller is waiting for a letter or number
input.
The Auto System Selection menu indicates the way your system is currently
set. Toggling the "Status" options by entering one of the numbers under
"Keys" on the left will result in a new configuration which will be executed as
soon as you press
E.
For example, if your disks contain more than one operating system, you could
choose one as the Selected System by pressing
2,
followed by
(Return ).
Configuring Internal Interfaces and Boot Modes 3-9
3