GE D20 Installation And Operation Manual page 5

GE Energy
Product Support and Safety
Warranty GE Energy warrants each D20 and D200 product to be free of defects in material and
workmanship under normal use and service for a period of 18 months from the date
of shipment from the factory.
In the event of a failure covered by warranty, GE Energy will undertake to repair or
replace the unit without charge, providing that the warrantor has determined that it is
defective.
Warranty shall not apply to any unit which has been subject to:
•
Misuse
•
Negligence
•
Accident
•
Incorrect installation
•
Use of this product in a manner not specified by GE Energy in this Guide.
•
Alterations by anyone other than GE Energy, or an authorized representative.
GE Energy is not liable for special, indirect or consequential damages, or for loss of
profit or expenses sustained as a result of a product malfunction, incorrect
application or adjustment.
Note The above terms are subject to change at any time, or as stipulated in contractual
agreements.
Safety Follow all safety precautions and instructions in this manual:
Precautions
•
Only qualified personnel should work on the D20/D200. Maintenance personnel
should be familiar with hazards associated with electrical equipment.
•
All AC voltage and current terminals are protected from accidental contact by
mechanical safety shields. The D20/D200 is designed so that field wiring does
not have to be touched or disconnected when removing field-replaceable printed
circuit boards (PCBs).
•
All components within the D20/D200 are susceptible to damage from
electrostatic discharge. Observe standard ESD precautions.
General
Full
, continued
994-0078-2.00-7
D20/D200
Installation and Operations Guide
3