Standard Power Supplies; D20/D200 Overcurrent Protection - GE D20 Installation And Operation Manual

GE Energy
Familiarization
, continued
Standard The following table gives details of the standard chassis-mounted, auxiliary and
Power Supplies redundant power supplies that are available. Other power supplies are available for
specific requirements. Contact GE Energy for details.
Type
Chassis-
mounted
Chassis-
mounted
Chassis-
mounted
Chassis-
mounted
Auxiliary
Auxiliary
Auxiliary
Auxiliary
Auxiliary
Redundant
Redundant
Redundant
Redundant
Redundant
D20/D200 Make sure your D20/D200 power input is externally protected for overcurrent. The
Overcurrent fuse rating that is required depends on the specific power consumption of your
Protection system.
General
Full
Part Number Input
580-2004 20 – 60 VDC
580-2005 20 – 60 VDC
580-2006 100 – 300 VDC
or
85 – 264 VAC
580-2007 100 – 300 VDC
or
+85 – 264 VAC
521 - 0103 20 – 60 VDC
521 - 0104 100 – 300 VDC
521 - 0105 90 – 250 VAC
521 - 0106 100 – 350 VDC
521 - 0107 90 – 250 VAC
580 - 0719 110 VAC/125
VDC
580 - 0741 220 VAC/48
VDC
580 - 0789 110 VAC/ 48
VDC
510 - 0241 115 VAC + 15%
30 – 60 VDC
510 - 0242 115 VAC + 15%
40 – 144 VDC
Installation and Operations Guide
Output
+5 V, 7 A
+12 V, 2 A
-12 V, 1 A
24 VDC, 3 A
+5 V, 7 A
+12 V, 2 A
-12 V, 1 A
48 VDC, 1.5 A
+5 V, 7 A
+12 V, 2 A
-12 V, 1 A
24 VDC, 3 A
+5 V, 7 A
+12 V, 2 A
-12 V, 1 A
48 VDC, 1.5 A
24 VDC, 75 W
24 VDC, 75 W
24 VDC, 75 W
48 VDC, 120 W
48 VDC, 120 W
24 VDC
48VDC
48 VDC
48 VDC, 2.5 A
48 VDC, 2.5 A
994-0078-2.00-7
D20/D200
Mounting
Rack-mounted
Rack-mounted
Rack-mounted
Rack-mounted
Rack-mounted
Rack-mounted
Rack-mounted
27