TP48200A-HT19C4-1 & TBC300A-TCA2
Installation Guide
Step 5 Under SNMP Trap, set Trap Target Address and Trap Port.
Step 6 Under Mib files, click Export to export the Mib file and import it to the NMS.
----End
Follow-up Procedure
You can query the power system operating status, active alarms, and the names of
user-defined dry contact inputs, and configure dry contact outputs on the NMS that is
connected over the SNMP.
10.8 Connecting the Battery Supply
Prerequisites
To avoid damage to batteries, switch on the battery circuit breaker only after correctly setting
the battery parameters.
Procedure
Step 1 Switch off the AC input circuit breaker.
Issue 01 (2014-03-12)
Figure 10-3 Setting SNMPv3 parameters
If there is only one NMS, perform
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Step 6
once.
10 Commissioning
80