Figure 2-85 Installing The Cpu Card; Figure 2-86 Removing The Plastic Knockout And Replacing The Main-Cover - NEC SL1100 Hardware Manual
Hide thumbs
Also See for SL1100:
- Features and specifications manual (864 pages) ,
- Programming manual (650 pages) ,
- Networking manual (292 pages)
Table of Contents
Advertisement
SL1100
7.
Cut and remove the Plastic Knockout for VoIP connector, then replace the Main-Cover and fasten
two screws.
Figure 2-86 Removing the Plastic Knockout and Replacing the Main-Cover
8.
Connect the VOIPDB-C1 to an Switching hub using an LAN Cable.
The LAN Cable must pass two times (two rounds) through the Ferrite Core as below. (Ferrite Core is
attached with VOIPDB-C1)
2-56
Figure 2-85 Installing the CPU Card
ISSUE 1.0
Installation
Advertisement
Table of Contents
