ISSUE 1.0
2.
Install four screws into the wall. The screw heads must stand off from the wall about 2.5 mm
(0.098") to 3.5 mm (0.138").
Wall-Mounting Screws (M4.1x 25: 4 pcs) are attached to the KSU.
The screw diameter is 4 mm (0.158") to 4.5 mm (0.177").
3.
Push the center of the Sub-Cover and slide it outward.
4.
Pull out the Sub-Cover by pushing out the tabs.
Hardware Manual
Figure 2-5 Screw Positions
Figure 2-6 Sub-Cover Slide-out
Figure 2-7 Removing the Sub-Cover
SL1100
2-5