ISSUE 1.0
6.
Replace the Main-Cover and fasten two screws.
3.3.3
Mounting the 2BRIDB PCB
Set the switches on the 2BRIDB-C1 PCB before mounting onto the
084M-B1/080E-B1/008E-B1/000E-B1 PCB, refer to the Switch Setting.
1.
Cut and remove specified Plastic Knockouts on the 084M-B1/080E-B1/008E-B1/000E-B1 PCB.
Hardware Manual
Figure 2-62 Mounting the 4COIDB-B1 into the KSU
Figure 2-63 Replacing the Main-Cover
SL1100
2-39