SL1100
SECTION 4 INSTALLING THE OPTIONAL INTERFACE CARDS
4.1
Installing the Expansion Memory Card (MEMDB-C1)
4.1.1
General
The Memory expansion daughter board (IP4[ ]-MEMDB-C1) provides additional memory for the system
to use following features;
To use VoIP Card (IP4WW-VOIPDB-C1)
E-Mail Notification (InMail)
VRS/InMail channel increase from 8 to 16 channels
Virtual Loopback
This daughter board is mounted on the CPU card and provides the SDRAM and flash memories.
4.1.2
Unpacking
Items
IP4[ ]-MEMDB-C1
4.1.3
Installing the MEMDB PCB
Do not remove or install the CPU card with power on.
1.
Turn off the system power and disconnect AC cord.
2.
Open and remove the Sub-Cover.
3.
Loosen two screws and remove the Main-Cover.
2-50
Table 2-17 MEMDB-C1 Packing List
List of Contents
MEMDB-C1 PCB
Figure 2-75 Removing the Sub-Cover
ISSUE 1.0
QTY
1
Installation