Ip4[ ]-008E-B1; Ip4Ww-000E-B1; Ip4Ww-4Coidb-B1; Ip4Ww-2Bridb-C1 - NEC SL1100 Hardware Manual

SL1100
2.2.2

IP4[ ]-008E-B1

This 008E card is installed in the 1228M KSU and provides a
total of eight analogue ports. Either the analogue trunk
daughter board (4COIDB) or the ISDN BRI daughter board
(2BRIDB) can be mounted on this card.
Install this card to the expansion card slot at Main KSU.

One analogue trunk or ISDN BRI daughter board

connection.
2.2.3

IP4WW-000E-B1

This 000E card is an expansion card and installed in the
1228M KSU. Either the analogue trunk daughter board
(4COIDB) or the ISDN BRI daughter board (2BRIDB) can be
mounted on this card.
Install this card to the expansion card slot at Main KSU.

One analogue trunk or ISDN BRI daughter board

connection.
2.2.4

IP4WW-4COIDB-B1

The 4COIDB provides four analogue trunk and is mounted on
the 084M, 080E, 008E or 000E card. A total of three 4COIDBs
can be installed per system.
Mount this board onto the 084M, 080E, 008E or 000E

card.
1 power failure transfer circuit

2.2.5

IP4WW-2BRIDB-C1

The 2BRIDB provides two ISDN (Basic Rate) circuit and is
mounted on the 084M, 080E, 008E or 000E card. A total of
three 2BRIDBs can be installed per system.
Mount this board onto the 084M, 080E, 008E or 000E

card.
Supports T/S point connection (Hard-switch).

All ISDN circuits are not supplied with DC power from

the system.
2.2.6

IP4WW-1PRIU-C1

The 1PRIU is installed in the 1228M KSU providing for an
ISDN Primary Rate Interface. A total of one 1PRIU can be
installed per system.
Install this card to the expansion card slot at Main KSU.

Supports T/S point connection (Hard-switch).

1-4
ISSUE 1.0
Introduction