Ekip Dip; General Characteristics - ABB SACE Emax E2.2 Installation, Operation And Maintenance Instructions For The Installer And The User

Ekip Dip

1 - General characteristics

Families SACE Emax 2 can be configured with two families of Trip units:
Versions and main functions Ekip Dip is available in three versions: Ekip Dip LI, Ekip Dip LSI, Ekip Dip LSIG.
Presentation
31 | © 2019 ABB | 1SDH001000R0002 - ECN000109166 - Rev. D
• Ekip Dip with interface via dip-switches
• Ekip Touch with touchscreen display
Both families provide protection and measuring functions related to signals from the installation and are
available in different models and versions.
Details of Ekip Dip are given in this document; for a description of Ekip Touch, consult document
1SDH001316R1002.
All versions provide the following functionalities:
• Measurement of installation currents
• Protection: depending on the measurements made and the parameters configured by the user, the Trip
unit checks for the presence of alarms and commands circuit-breaker opening if necessary
• Signalling: management of contacts and communication networks to optimize plant efficiency, communication
among different CB and other functions
The Ekip Dip functions are provided both by means of transducers and actuators inside the circuit-breaker,
and by means of a vast range of external accessories
Figure 75
Ekip Dip has a dip-switch (1) interface for configuring and verifying the protections and main parameters
(page 33).
The nominal size of the Rating plug (2) can be checked on the front (page 49).
All the external connections, including the supply and communication modules, the external sensors and
mechanical accessories, are available in the upper terminal box (3) (page 48 for an overview of the electronic
accessories).
ABB | SACE Emax 2
Ekip Dip | 1 - General characteristics