NEC DS1000 Correspondence Course Workbook page 16

DS1000/2000 Correspondence Course
Using Your Telephone
The shaded rows below show the Fixed Slot software User Programmable Features.
Programmable Function
Key Assignments
Programmable Function
Key Ringing
Ringing Line Preference
Speed Dial, Personal
Speed Dial, Personal
Speed Dial, System
Speed Dial, System
System Program Access
16 DS1000/2000 Workbook
User Programmable Features
Feature Mnemonic
#KP
#RAC
#RAL
#RAP
#RLP
#SP
#SP
#*#*
Operation
#KP + Press key you want to program +
HOLD + ICM + Press VOL Up or VOL
Down to select key option + HOLD +
(Enter any additional data if required +
HOLD ) + Press VOL Up or VOL Down
to select another key to program, or
CONF + SPK to exit.
Call Coverage Keys: #RAC + Call Cover-
age Key repeatedly to select ringing mode
+ SPK to exit.
Call Coverage Keys flash as follows:
Lamp only=On red, Immediate ring=On
green, Delay ring=Fast flash green.
Outside Line Keys: #RAL + Line Key
repeatedly to select ringing mode + SPK
to exit.
Line keys flash as follows: Lamp
only=On red, Immediate ring=On green,
Delay ring=Fast flash green, Night
ring=Slow flash green.
Group Call Pickup Keys: #RAP + Group
Call Pickup Key repeatedly to select ring-
ing mode + SPK to exit.
Group Call Pickup Keys flash as follows:
Lamp only=On red, Immediate ring=On
green, Delay ring=Fast flash green.
#RLP + Y to enable or N to disable + SPK
to exit.
ICM + ## + 200-299
#SP + Press bin key (for bins 701-710) or
DIAL then bin key (for bins 711-720) +
HOLD + Enter outside line (e.g., 1), line
group (90-98), or ICM for Intercom fea-
ture + HOLD + Number to store + HOLD
+ Name + HOLD + Press another bin key
or SPK to exit.
ICM + ## + 701-720
#SP + Dial System Speed Dial bin num-
ber (e.g., 200) + HOLD + Enter outside
line (e.g., 1), line group (90-98), or ICM
for Intercom feature + HOLD + Number
to store + HOLD + Name + HOLD +
Press another bin key or SPK to exit.
#*#* + Enter programming password
Access Level
3-5
2-5
2-5
N/A
1-5
N/A
4 and 5
3-5
NEC America