NEC DS1000 Correspondence Course Workbook page 144

DS1000/2000 Correspondence Course
System Programming
Program 1805 - Ring Assignments
144 DS1000/2000 Workbook
Use this program to set up incoming ringing for each trunk at each
extension.
1. Enter the programming mode.
2. 1805 +
HOLD
1805:RING ASSIGNMENT
STATION #?n
3. Enter the extension number you want to program +
OR
Press to select extension 300.
HOLD
1805: STA nnn
LINE NUMBER?n
The previously programmed value displays.
4. Enter the number of the trunk you want to program +
OR
Press to select trunk 1.
HOLD
1805:STA:nnn LINE:n
DAY / NITE RING
The previously programmed value displays on the second line. The
first line of the display shows the extension and trunk you are pro-
gramming.
5. For the extension and trunk selected, enter the ring option (1 = Lamp only
(day and night), 2 = Ringing day and night, 3 = Night Ring only, lamp during
the day, 4 = Delay ring day and night) +
OR
Press to leave the current entry unchanged.
VOL
1805:STA:nnn LINE:n
DAY / NITE RING
You see the options for the next consecutive trunk. The previously
programmed value displays.
6. Enter the ring option for the trunk +
OR
Press to select another trunk.
CONF
OR
Press twice to select another extension.
CONF
OR
Press three times to exit the program.
CONF
HOLD
HOLD
VOL
VOL
NEC America