Installing O-Ring To Base; Setting Switch Of Sy-1 Board Ass'y (Compl Pwb Sy-1) - Sanyo VCC-9300 Mechanism Service Technical Information

18. Installing O-Ring to Base

18-1. Install O-Ring 60 to the groove of Base 2 .

19. Setting Switch of SY-1 board ass'y (Compl pwb SY-1)

19-1. Set the switches of [S0201] and [S0202] on SY-1 board ass'y (Compl pwb SY-1) 202 .
Setting of the coaxial control
SO201
Figure of Step 18-1
SO202
Initial setting
Figure of Step 19-1
Setting of the RS485
SO201
–44–
60
O-Ring
The unit reassemled in Step 17-5
SO202