Table of Contents
Advertisement
7. Removing Pan motor (Motor ass'y)
7-1.
Remove Pan belt (Synchoro belt 140) 55 . Turn Pan belt (Synchro belt 140) 55 while lifting up on, so that you can
remove it easily.
7-2.
Remove the connector from Pan motor (Motor ass'y) 152 .
This is the disassembling procedure after the disassembling of:
1. Removing Base unit: Page 9
2. Removing Rotation unit: Page 9
7-3.
Remove Binder 63 holding the cable of Pan motor (Motor ass'y) 152 using nipper.
7-4.
Remove Screws 101 (x2), then remove Pan motor (Motor ass'y) 152 .
Remove Screws 116 (x2), then remove Synchro pulley (N22) 21 from Pan motor (Motor ass'y) 152 .
7-5.
Refer to Step 4-1 through Step 4-4 on page 25 for reassembling.
55
Pan belt
(Synchro belt 140)
Figure of Steps 7-1 and 7-2
21
Synchro pulley (N22)
63
Binder
152
Pan motor
(Motor ass'y)
Figure of Step 7-3 through Step 7-5
–14–
Connector
to be removed
1
101
Screws
3x10 mm (x2)
Advertisement
Table of Contents
