Removing Pan Belt (Synchro Belt 140) And Synchro Pulley (N132) - Sanyo VCC-9300 Mechanism Service Technical Information

8. Removing Pan belt (Synchro belt 140) and Synchro pulley (N132)

8-1. Remove Pan belt (Synchro belt 140) 55 . Turn Pan belt (Synchro belt 140) 55 while lifting up on, so that you can
remove it easily.
This is the disassembling procedure after the disassembling of:
1. Base unit: Page 9
2. Removing Rotation unit: Page 9
8-2. Remove Screws 106 (x2), then remove Synchro pulley (N132) 20 .
20
Synchro pulley (N132)
Refer to Step 1-4 on page 21 and Step 4-2 through Step 4-4 on page 25 for reassembling.
55
Figure of Step 8-1
106
Screws
2.6x6 mm (x2)
Figure of Step 8-2
Pan belt
(Synchro belt 140)
Connector
to be removed
1
106
–15–