Transporting The Machine - Toro GreensPro 1260 Greens Roller Operator's Manual

Transporting the Machine

1. Drive the machine to the transport vehicle.
2. Engage the parking brake.
3. Move the throttle lever to the low-speed position,
and allow the engine to run for 10 to 20 seconds.
4. Turn the On/Off switch to the O
5. Turn the fuel-shutoff valve to the C
position.
6. Raise the machine onto the transport wheels as
follows:
A. Push up on the hitch assembly until the
latch lever is unlocked from the slide detent
(Figure 24).
Figure 24
1. Latch lever
B. Lift the latch lever so that it slides freely,
and pull the hitch down.
position.
FF
LOSED
g024011
1. Hitch pedal
7.
20
Figure 25
C. Step on the hitch pedal until the hitch locks
into place (Figure
Figure 26
D. Insert the locking pin
Lower the machine onto the rollers as follows:
A. Remove the locking pin
g024010
26).
g024197
2. Locking pin
(Figure 26).
(Figure 27).