Table of Contents
Advertisement
Operation
Note:
Determine the left and right sides of the
machine from the normal operating position.
Before Operation Safety
General Safety
•
Never allow children or untrained people to
operate or service the machine. Local regulations
may restrict the age of the operator. The owner
is responsible for training all operators and
mechanics.
•
Become familiar with the safe operation of the
equipment, operator controls, and safety signs.
•
Know how to stop the machine and engine quickly.
•
Check that operator-presence controls, safety
switches, and shields are attached and functioning
properly. Do not operate the machine unless they
are functioning properly.
•
Before operating, always inspect the machine
to ensure that the components and fasteners
are in good working condition. Replace worn or
damaged components and fasteners.
•
Inspect the area where you will use the machine
and remove all objects that the machine could
throw.
Fuel Safety
•
Use extreme care in handling fuel. It is flammable
and its vapors are explosive.
•
Extinguish all cigarettes, cigars, pipes, and other
sources of ignition.
•
Use only an approved fuel container.
•
Do not remove the fuel cap or fill the fuel tank
while the engine is running or hot.
•
Do not add or drain fuel in an enclosed space.
•
Do not store the machine or fuel container where
there is an open flame, spark, or pilot light, such
as on a water heater or other appliance.
•
If you spill fuel, do not attempt to start the engine;
avoid creating any source of ignition until the fuel
vapors have dissipated.
Preparing to Use the
Machine
1.
Clear any debris from above and underneath
the machine.
2.
Ensure that all scheduled maintenance has
been completed.
3.
Ensure that all guards and covers are in place
and firmly attached.
4.
Check the level of the engine oil.
5.
Ensure that there is fuel in the fuel tank.
6.
Ensure that the parking brake is engaged.
7.
Lift the transport wheels clear of the ground and
ensure that they are locked in place.
Checking the Hydraulic
Hoses and Fittings
Service Interval: Before each use or daily
Check the hydraulic system for leaks, loose mounting
supports, wear, loose fittings, weather deterioration,
and chemical deterioration. Make all necessary
repairs before operating the machine.
WARNING
Hydraulic fluid escaping under pressure can
penetrate skin and cause injury.
• Seek immediate medical attention if fluid
is injected into skin.
• Make sure that all hydraulic fluid hoses
and lines are in good condition and all
hydraulic connections and fittings are tight
before applying pressure to the hydraulic
system.
• Keep your body and hands away from
pinhole leaks or nozzles that eject
high-pressure hydraulic fluid.
• Use cardboard or paper to find hydraulic
leaks.
• Safely relieve all pressure in the hydraulic
system before performing any work on the
hydraulic system.
Checking the Level of the
Engine Oil
Service Interval: Before each use or daily
Note:
The best time to check the engine oil is when
the engine is cool before it has been started for the
day. If it has already been run, allow the oil to drain
back down to the sump for at least 10 minutes before
checking it.
Crankcase Capacity: 0.60 L (0.63 US qt)
Type: APl service classification SL, SM, SN, or higher
Viscosity: select according to ambient temperature;
refer to
Figure
16.
14
Hide quick links:
Advertisement
Table of Contents
