Safety And Instructional Decals - Toro Greensmaster 3150 Series Operator's Manual

•
Wear appropriate clothing, including eye
protection; substantial, slip-resistant footwear;
long pants, and hearing protection. Tie back long
hair and do not wear loose jewelry.
•
Inspect the area where the equipment is to be
used and remove all objects, such as rocks, toys,
and wire, that the machine can throw.
•
Check that operator's presence controls, safety
switches, and shields are attached and functioning
properly. Do not operate the machine unless they
are functioning properly.
•
Stop the machine, remove the key, and wait for
all moving parts to stop before inspecting the
attachment after striking an object or if there is
an abnormal vibration in the machine. Make all
necessary repairs before resuming operation.

Safety and Instructional Decals

Safety decals and instructions are easily visible to the operator and are located near any area
of potential danger. Replace any decal that is damaged or missing.
1. Warning—read the
instructions before
servicing or performing
maintenance.
104–7729
2. Cutting/dismemberment
hazard; hand or foot—shut
off the engine and wait for
moving parts to stop.
•
Keep your hands and feet away from the cutting
units.
•
Keep all parts in good working condition and all
hardware tightened. Replace all worn or damaged
decals.
•
A worn or damaged blade can break, and a
piece of the blade could be thrown toward you or
bystanders, resulting in serious personal injury or
death.
•
Inspect the blade periodically for wear or damage.
•
Use care when checking the blades. Wrap the
blades or wear gloves, and use caution when
servicing the blades. Only replace or sharpen the
blades; never straighten or weld them.
•
On multi-bladed machines, take care as rotating 1
blade can cause other blades to rotate.
decal104-7729
4