Installation; Installing The Projector - Sanyo PLC-XR70N Owner's Manual

Multimedia rear-projection display
Hide thumbs Also See for PLC-XR70N:
Table of Contents

Advertisement

INSTALLATION

Contact the sales dealer and request to install this projector. For installing this appliance properly, technical
services are required. Any person who is not familiar with technical terms and skills, should not attempt to install.
This projector should be installed referring to the Installation Manual separately attached.
Caution for Installation
When installing and placing this projector, please observe the following precautions:
l Install the projector by two people.
l Any package material should not be left inside the cabinet.
l Be careful not do drop any part or tool like screw into the appliance. If it should, contact a service center.
l Never touch the Projection Screen, Lens and Mirror directly. They may effect the projection image quality.
l Place the projector where is indicated on this Owner's Manual.
This projector never be placed outdoor
When placing the projector, the spaces for ventilation must be maintained. And fix the projector with the Lock
Bolts to settle it securely.
Top View
20cm
(7.8")
6

INSTALLING THE PROJECTOR

Caution to the Installation
Placing and Settling the Projector
Side View
10cm(3.9")
20cm
(7.8")
u
Fix the projector securely.
20cm(7.8")
Lifting the
projector up to
10cm
settle it.
(3.9")
Turn the Lock Bolts to the direction
indicated on the figure to lock the
cabinet on the floor. Make sure
that all the Casters are slightly
raised from the floor.
The tilt of the Cabinet can be also
adjusted with these Lock Nuts.
Letting the
projector down to
move it.

Advertisement

Table of Contents
loading

Table of Contents