Output Characteristics - ABB PowerValue 11/31 T Operating Manual

Frequency tolerance
Tolerance, referred to 230V
Current (r.m.s), rated (with
battery charged and input
400/230V)
Current (r.m.s), maximum (with
charging batt. and input
400/230V)
Total harmonic distortion
(THDi)
Power factor
Rated short-time withstand
current (I )
cw
AC POWER DISTRIBUTION SYSTEM: TN-S AND TT
Phases required
Neutral required
ADDITIONAL AND USUAL INFORMATION
Connection
Cable entry
Accessibility
Walk In/Soft Start

OUTPUT CHARACTERISTICS

Power, rated:
AC POWER DISTRIBUTION SYSTEM: TN-S AND TT
Available phases
Neutral available
Rated voltage
(steady state, r.m.s.)
Variation in
normal mode / battery mode
TOTAL HARMONIC DISTORTION (THDU), 100% LOAD, NORMAL MODE:
Linear
Non-linear
(acc. to IEC 62040-3)
TOTAL HARMONIC DISTORTION (THDU), 100% LOAD, BATTERY MODE:
Linear
Non-linear
(acc. to IEC 62040-3)
Voltage unbalance and phase
displacement, 100% load un-
balance
VOLTAGE TRANSIENT AND RECOVERY TIME, 100% STEP LOAD:
Linear
Non-linear
(acc. to IEC 62040-3)
Transfer normal mode --> bat-
tery mode
Frequency (steady-state), rated
Variation in normal and battery
mode
Variation in free-running
Max synch phase error
(referred to a 360° cycle)
Max slew-rate
PowerValue 11/31 T Technical Specifications
± 10%
-23% / +20% at <100% load,
-33% / +20% at <80% load,
-43% / +20% at <60% load,
-48% / +20% at <40% load
42 A
48 A / 54 A (for S model)
≤5% (IEC 61000-3-4)
0.99 @ 100% load
2 kA (10 kVA)
4 kA (20 kVA)
3 or 1
Yes
5 wires, 3 phase + N + PE or 3 wires, 1 phase + N + PE
Rear
Rear
Yes (Power supply needed only for first start-up)
10 kVA
9000 W
1
Yes
208 / 220 / 230 / 240 VAC (90% de-rating at 200Vac)
± 1%
< 2%
< 5%
< 2%
< 5%
N/A
IEC 62040-3 Class 1
IEC 62040-3 Class 1
0 ms
50 / 60 Hz (selectable)
Max ± 10%
± 0.05 Hz
≤3°
1 Hz/s
84 A
90 A / 97 A (for S model)
20 kVA
18000 W
Page 8