Huawei PDU8000-0125DCV8-BXA001 User Manual page 27

PDU8000-(0125, 0250, 0400, 0630, 0800)
DCV8-BXA001 Battery Circuit Breaker Box
User Manual
(1) Mounting
bracket
Step 5 Tighten the four bolts to secure the BCB box to the wall.
Step 6 If there are multiple BCB boxes, secure the other BCB boxes to the wall.
----End
Rack-mounted
Step 1 Install four mounting brackets on the BCB box using sixteen M4 screws.
Step 2 Install four M6x20 screws on the battery rack.
Step 3 Hang the BCB box on the screws and tighten the screws to secure the BCB box.
Figure 3-6 Installing the BCB box on a battery rack
(1) BCB box
Issue 03 (2019-05-20)
(2) Expansion bolt
 Determine the screw installation positions based on the dimensions of the marking-off template in
the fitting bag. For details, see the related battery rack manual.
 The four M6 screws for rack-mounting the battery rack are delivered with the rack. Determine the
BCB box installation position, remove the screws, and then partially tighten them in the proper
position.
When the BCB box is installed on the customer battery rack, drill holes in the rack first. 7 mm diameter
is recommended. It is recommended to secure the BCB box by bolts.
Copyright © Huawei Technologies Co., Ltd.
(3) Wall
(2) Battery rack
3 Installation
(4) BCB-BOX
22