Installation; Unpacking And Checking; Installation Preparations; Tools - Huawei PDU8000-0125DCV8-BXA001 User Manual

PDU8000-(0125, 0250, 0400, 0630, 0800)
DCV8-BXA001 Battery Circuit Breaker Box
User Manual

3.1 Unpacking and Checking

After the BCB box is delivered onsite, unpack the case and check as follows:



3.2 Installation Preparations

3.2.1 Tools

Tools
Multimeter
Insulated torque wrench
Issue 03 (2019-05-20)
Visually inspect the BCB box for shipping damage. If it is damaged, notify the carrier
immediately.
Check that the device bar code is consistent with that in the order. Check that the fittings
comply with the packing list. The rodent-proof mesh and screws are bound to copper
bars. You can find them after you remove the baffle in the BCB box. If some fittings
are missing or do not comply with the packing list, record the information and contact
your local Huawei office immediately.
Screws are tied to copper bars in the BCB box. Therefore, remove the isolation board before taking out
the screws.
Copyright © Huawei Technologies Co., Ltd.
3
Phillips screwdriver (PH2 x
150 mm or PH3 x 250 mm)
Combination wrench

3 Installation

Installation
Insulated adjustable wrench
Hydraulic pliers
12