Adjusting The Tracking - Toro Groundsmaster 7210 Series Operator's Manual

Adjusting the Tracking

1. Disengage the PTO, move the motion-control
levers to the N
EUTRAL
engage the parking brake.
2. Move the throttle lever to the S
shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3. Loosen the bolts securing the control levers
(Figure 83).
Figure 83
1. Control lever
2. Control-lever post
4. Have someone push the control-lever posts (not
the control levers) all the way forward into the
maximum-speed position and hold them there.
5. Adjust the control levers so that they line up and
tighten the bolts, securing the levers to the posts
(Figure 84).
- position, and
LOCK
position,
LOW
g004919
3. Bolts
59
Figure 84
g001656