Toro Groundsmaster 7210 Series Operator's Manual page 14

Protected Menus
There is 1 operating function that is accessed within
the Service Menu of the InfoCenter: Regeneration
request; refer to Diesel Particulate Filter Regeneration
(page 28). This function is in the Protected Menu.
Accessing Protected Menus
Note:
The factory default PIN code for you machine
is either 0000 or 1234.
If you changed the PIN code and forgot the
code, contact your Authorized Toro Distributor for
assistance.
1. From the M M
AIN
scroll down to the S
right button (Figure
2. In the S M
ETTINGS
scroll down to the P
the right button (Figure
, use the center button to
ENU
M and press the
ETTINGS ENU
8).
Figure 8
, use the center button to
ENU
M and press
ROTECTED ENU
9A).
3. To enter the PIN code, press the center button
until the correct first digit appears, then press
the right button to move on to the next digit
(Figure 9B and
g028523
until the last digit is entered and press the right
button once more.
4. Press the middle button to enter the PIN code
(Figure 9D).
Wait until the red indicator light of the InfoCenter
illuminates.
Note:
If the InfoCenter accepts the PIN code
and the protected menu is unlocked, the word
"PIN" displays in the upper right corner of the
screen.
Note:
Rotate the key switch to the O
then to the O
N
You have the ability to view and change the settings in
the Protected Menu. Once you access the Protected
Menu, scroll down to Protect Settings option. Use the
right button to change the setting. Setting the Protect
Settings to O
FF
settings in the Protected Menu without entering the
PIN code. Setting the Protect Settings to O
protected options and requires you to enter the PIN
code to change the setting in the Protected Menu.
After you set the PIN code, rotate the key switch O
and back to the O
feature.
14
Figure 9
Figure 9C). Repeat this step
position locks the protected menu.
allows you to view and change the
position to enable and save this
N
g028522
position and
FF
hides the
N
FF