Loading The Machine - Toro Groundsmaster 7210 Series Operator's Manual

WARNING
Driving on the street or roadway without
turn signals, lights, reflective markings, or a
slow-moving-vehicle emblem is dangerous
and can lead to accidents causing personal
injury.
Do not drive the machine on a public street
or roadway.
1. If you are using a trailer, connect it to the towing
vehicle, and connect the safety chains.
2. If applicable, connect the trailer brakes.
3. Load the machine onto the trailer or truck.
4. Shut off the engine, remove the key, engage the
parking brake, and close the fuel valve.
5. Use the tie-down loops on the machine to
securely fasten it to the trailer or truck with
straps, chains, cable, or ropes
Figure 54
1. Traction unit tie-down loops

Loading the Machine

Use extreme caution when loading or unloading
machines onto a trailer or a truck. Use a full-width
ramp that is wider than the machine for this procedure.
Back up the ramp and drive forward down the ramp
(Figure
1. Back the machine up the
Important:
(Figure 54).
for each side of the machine.
g191318
39
55).
Figure 55
ramp.
Do not use narrow individual ramps
g027995
2. Drive the machine forward
down the ramp.