Control the Display Line
:DISPlay:WINDow:TRACe:Y:DLINe:STATe OFF|ON|0|1
:DISPlay:WINDow:TRACe:Y:DLINe:STATe?
Turns the display line on or off.
Factory Preset
and *RST:
Front Panel
Access:
Normalized Reference Level
:DISPlay:WINDow:TRACe:Y[:SCALe]:NRLevel <rel_ampl>
:DISPlay:WINDow:TRACe:Y[:SCALe]:NRLevel?
Sets the normalized reference level.
See command :CALCulate:NTData[STATe] OFF|ON|0|1
NOTE
Factory Preset
and *RST:
Range:
Default Unit:
Front Panel
Access:
Normalized Reference Level Position
:DISPlay:WINDow:TRACe:Y[:SCALe]:NRPosition <rel_ampl>
:DISPlay:WINDow:TRACe:Y[:SCALe]:NRPosition?
Selects the position of the normalized reference level. The top and
bottom graticule lines correspond to 10 and 0, respectively.
See command :CALCulate:NTData[STATe] OFF|ON|0|1
NOTE
Factory Preset
and *RST:
Range:
Front Panel
Access:
Chapter 5
Off
Display, Display Line On Off
0 dB
–327.6 to 327.6 dB
Current active units
View/Trace, Normalize, Norm Ref Lvl
10
0 to 10
View/Trace, Normalize, Norm Ref Posn
Language Reference
DISPlay Subsystem
5-41