Calculate:marker Subsection - HP ESA-E Series Programmer's Manual

Language Reference
CALCulate Subsystem

CALCulate:MARKer Subsection

Markers All Off on All Traces
:CALCulate:MARKer:AOFF
Turns off all markers on all the traces.
Front Panel
Access:
Marker, Marker All Off
Continuous Peaking Marker Function
:CALCulate:MARKer[1]|2|3|4:CPEak[:STATe] OFF|ON|0|1
:CALCulate:MARKer[1]|2|3|4:CPEak[:STATe]?
Turns on or off continuous peaking. It continuously puts the selected
marker on the highest displayed signal peak.
Factory Preset
and *RST: Off
Front Panel
Access:
Search, Continuous Pk On Off
Frequency Counter Marker Resolution
:CALCulate:MARKer:FCOunt:RESolution <real>
:CALCulate:MARKer:FCOunt:RESolution?
Sets the resolution of the marker frequency counter. AUTO ON couples
the marker counter resolution to the frequency span.
Factory Preset
and *RST: 1 kHz
Range: 1 Hz to 100 kHz
Default Unit: Hz
Front Panel
Access:
Freq Count, Resolution Auto Man
Frequency Counter Marker Resolution Automatic
:CALCulate:MARKer:FCOunt:RESolution:AUTO OFF|ON|0|1
:CALCulate:MARKer:FCOunt:RESolution:AUTO?
Sets the resolution of the marker frequency counter so it is
automatically coupled to the frequency span, generating the fastest
accurate count.
Factory Preset
and *RST: On
5-18 Chapter 5