Output Relays; Virtual Outputs; Self-Test Errors - GE 745 TRANSFORMER MANAGEMENT RELAY Instruction Manual

6 ACTUAL VALUES
S OUTPUT RELAYS
S [ENTER] for more
OUTPUT RELAY 1
STATE: De-energized
SELF-TEST RELAY
STATE: Energized
S VIRTUAL OUTPUTS
S [ENTER] for more
VIRTUAL OUTPUT 1
STATE: De-energized
S SELF-TEST ERRORS
S [ENTER] for more
FLEXLOGIC EQN ERROR:
None
BAD SETTINGS ERROR:
None
GE Power Management
This message indicates the start of the Output Relays actual values. To view
these actual values press
This message displays the state of output relay #1. Similar messages
appear sequentially for output relays 2 through 8.
This message displays the state of the self-test relay.
This message indicates the start of the Virtual Outputs actual values. To view
these actual values press
This message displays the state of virtual output #1. Similar messages
appear sequentially for virtual outputs 2 through 5.
This message indicates the start of the Self-Test Errors actual values. To
view these actual values press
ending of page S1.
This message displays the source of the error occurring in the FlexLogic™
equation.
This message displays the cause of a bad setting made within the setting of
the setpoints.
745 Transformer Management Relay

6.2.5 OUTPUT RELAYS

or press for the next section.
E N TE R
M E SSA G E

6.2.6 VIRTUAL OUTPUTS

or press for the next section.
E N TE R
M E SSA G E

6.2.7 SELF-TEST ERRORS

. Pressing
E N TE R
M E SSA G E
6.2 A1 STATUS
proceeds to the
6
6-3