Figure 8-1 Nec Conference Max - NEC Univerge SV8100 System Hardware Manual

Issue 2.0
2.2
8 - 2

Figure 8-1 NEC Conference Max

Installation
1. Connect the provided 25 foot Cat. 5 cable between the LINK OUT jack of
the base unit and the LINK IN jack of the conferencing pod.
2. Connect the provided RJ-11 cable between the base unit and the
telephone jack.
3. Connect the power cord to the base unit and plug it in an electrical outlet.
4. To connect additional units, connect a 12 foot Cat. 5 cable between the
LINK OUT jack of the unit connected to the base unit and the LINK IN
jack of the second unit and repeat the connection of another 12 foot Cat.
5 cable between the LINK OUT jack of each unit to the LINK IN of the
next unit in sequence.
UNIVERGE SV8100
™
Installing SV8100 Conference Solutions