Table 5-11 Numbered Keypad Type; Configuring The Digital Telephone For The Ten Key Kit - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
System Hardware Manual
4.8.3

Configuring the Digital Telephone for the Ten Key Kit

1. With the telephone not plugged in and the handset on-hook,
press the 4 and 6 buttons on the numbered keypad and
connect the telephone cable.
 This places the telephone into Service Class Read/Write (R/W) mode.
The Message Waiting LED should be On.
2. Press 2 on the numbered keypad to enter the Button Kit mode.
 The Message Waiting LED should flash.
3. Follow the directions below for the type of keypad installed:
Numbered Keypad Type
Japan Value
Model A Telephone
Model B UX5000 Telephone
Call Center
Hotel-1
Hotel-2
Retirement Home
Japan 32-Button
Japan Economy
Model A Economy
Model B Economy
Reserve
4. Press line key 2, 8, 14 or 20 to save to memory. The display
changes back to the Service Class R/W mode and the Red
Message Waiting (MW) LED is On.
5. Press Exit to return the telephone to idle.

Table 5-11 Numbered Keypad Type

Push
01 Line 1 LED on Red
02 Line 2 LED on Red
03 Line 1 and 2 LED on Red
04 Line 1 LED on Green
05 Line 2 LED on Green
06 Line 1 and 2 LED on Green
07 Line 1 LED flashing Red
08 Line 2 LED flashing Red
09 Line 1 and 2 LED flashing Red
10 Line 1 LED flashing Green
11 Line 2 LED flashing Green
12 Line 1 and 2 LED flashing Green
Issue 2.0
LED Indication
(2D Style Terminal)
5 - 43