Unpacking The Equipment; Table 3-1 Power Failure Transfer Connections; Table 3-2 Power Failure Transfer Connections (Fax Co) - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
2.6
I
S 3
NSTALLING THE
ECTION
3.1
System Hardware Manual

Table 3-1 Power Failure Transfer Connections

Pin Number
1 Not in Use
3 Tip for Circuit 2
5 Tip for Circuit 1
7 Not in Use
Fax CO Branch Connection
The Fax Branch Connection feature uses the Power Failure Transfer relays
located on the COIU Blades (CN3). Each COIU Blade supports two Fax CO
Branch Connections.
 Power Failure and FAX Branch Connection do not function simultaneously at the same
time on the same port. Use Program 14-02-21 (Fax Branch Connection) to enable this
feature on a per trunk basis.

Table 3-2 Power Failure Transfer Connections (Fax CO)

Pin Number
1 Not in Use
3 Tip for Circuit 2
5 Tip for Circuit 1
7 Not in Use
C
HASSIS

Unpacking the Equipment

Inspect the equipment for any physical damage. If you are not sure about the
function of a component, review the associated information within this manual.
Contact your authorized NEC Sales Representative if you have additional
questions. Note that the chassis does not initially contain any blades.
Make sure you have appropriate tools for the job, including: a test set, a punch
down tool, and a digital voltmeter.
Description Pin Number
Description Pin Number
Description
2 Not in Use
4 Ring for Circuit 1
6 Ring for Circuit 2
8 Not in Use
Description
2 Not in Use
4 Ring for Circuit 1
6 Ring for Circuit 2
8 Not in Use
Issue 2.0
3 - 5