Figure 3-98 Attach Horizontal Brackets To Rack - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
System Hardware Manual
2. Attach the two horizontal rack bars at the correct positions on the rack
with the screws provided. The bars are used to secure the chassis
vertically in the rack.

Figure 3-98 Attach Horizontal Brackets to Rack

3. Secure the (CHS2U B-US) and (CHS2U E) chassis to the horizontal bars
using two screws at each point (refer to
US) and (CHS2U E) Chassis to Rack on page
Controlling and Expansion chassis must be installed
vertically for proper air circulation.
Figure 3-99 Attach (CHS2U B-
3-86).
Issue 2.0
3 - 85