Figure 4-4 Inserting Blades In The 19" Chassis; Figure 4-5 Inserting Blades In The 9.5" Chassis; Installing An Extension Or Trunk Blade - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
2.2
System Hardware Manual

Installing an Extension or Trunk Blade

2.2.1 Installing the Blades
To install an extension/trunk blade with the system running:
1. Insert the blade in the guide rail and push it securely into
position. Tighten the thumb screw on either side of the blade.
2. The Status LED starts flashing when the blade starts
processing (15 seconds).

Figure 4-4 Inserting Blades in the 19" Chassis

Figure 4-5 Inserting Blades in the 9.5" Chassis

Issue 2.0
4 - 5