Section 10 Installing A Button Set On A Multiline Terminal - NEC Electra Elite IPK II System Hardware Manual

Electra Elite IPK II
___________________________________________________________________________________
S 10 I
ECTION NSTALLING A
The BS( )-R Unit button set can be installed on a Multiline Terminal to accommodate
French and Spanish languages. The keypad provides the appropriate language
designations.
1.
2.
3.
4.
___________________________________________________________________________________
System Hardware Manual
B S
UTTON
Remove the plastic cover. (Refer to paragraph
on page 8-23.)
Pull up on the tab and lift the button pad away from the telephone to remove the
existing button.
Figure 8-29 Removing the Button Set from a Multiline Terminal
Slide the new button set into the grooves located on the inside of the telephone,
then press down on the button set to snap it into place.
Figure 8-30 Inserting a New Button Set into a Multiline Terminal
Insert the line card and plastic panel on the Multiline Terminal.
M
ET ON A ULTILINE
Document Revision 3
T
ERMINAL
8.2 Removing the Plastic Panel
8 - 25