Installing Built-In And External Batteries In The Ksu; Built-In Battery Installation - NEC Electra Elite IPK II System Hardware Manual

Electra Elite IPK II
___________________________________________________________________________________
3.11
___________________________________________________________________________________
System Hardware Manual

Installing Built-In and External Batteries in the KSU

3.11.1

Built-In Battery Installation

1. Connect the two batteries in series as shown in
Connecting Built-In
terminal and the black cord attaches to the black terminal.
2. Install the batteries into the bottom space at the left side the
KSU. Refer to
F101 (DC In)
Figure 5-26 PSU Fuse Replacement
Batteries. The red cord attaches to the red
Be careful, and properly connect the
terminals of the batteries.
Figure 5-27 Connecting Built-In Batteries
Figure 5-28 Placing the Batteries into the
Document Revision 3
F1 (AC In)
Figure 5-27
KSU.
5 - 27