NEC Electra Elite IPK II System Hardware Manual page 195

Electra Elite IPK II
___________________________________________________________________________________
___________________________________________________________________________________
System Hardware Manual
Table 6-19 DTI-U40 Default Switch Settings (Continued)
Switch
SW3-2 ON: To be determined
OFF: No operation (Default)
SW3-3 ON: To be determined
OFF: No operation (Default)
SW3-4 ON: To be determined
OFF: No operation (Default)
The DTI-U40 works only with the SW3-2~SW3-4

Default settings.
SW4/5 SW4 SW5
T1/J1 T1 120Ω
T1/J1 J1 75Ω
E1 T1 120Ω
E1 J1 75Ω
E1 Services are not supported

SW6
Setting
Termination mode
T1 mode (Default)
J1 mode
E1 mode (120Ω
termination)
E1 mode (75Ω
termination)
Reset Switch
Document Revision 3
Description
6 - 53