Table of Contents
Advertisement
Electrical Require-
ments
Before you insert the
plug into the wall socket
make sure that the volt-
age and the frequency
shown on the rating plate
inside the appliance cor-
responds to your electric-
ity supply.
Rating label is on the left
hand side of inner liner.
We recommend that this
appliance be connected
to the mains supply via a
suitable switched and
fused socket. The appli-
ance must be positioned
so that the plug is acces-
sible.
Should the mains lead
of the appliance become
damaged or should it
need
replacing at any time, it
must be replaced by a
special purpose made
mains lead which can
only be obtained from a
BLOMBERG Authorised
Service Agent.
Warning! This Appli-
ance Must Be Earthed
If the fitted moulded plug
is not suitable for your
socket, then the plug
should be cut off and
an appropriate plug fit-
ted. Destroy the old plug
which is cut off as a plug
with bared cord could
cause a shock hazard
if inserted into a socket
elsewhere in the house.
The moulded plug on
this appliance incorpo-
rates a 13 A fuse. Should
the fuse need to be re-
placed an ASTABEAB
approved BS 1362 fuse
of the same rating must
be used. Do not forget to
refit the fuse cover. In the
event of losing the fuse
cover the plug must not
be used until a replace-
ment fuse cover has
been fitted. Colour of the
replacement fuse cover
must be the same colour
as that visible on the pin
face of the plug. Fuse
covers are available from
any good electrical store.
7
EN
Advertisement
Table of Contents
