Using Your Refrigerator; Led Indicators And Control Panel - Blomberg SSM1351I User Manual

5

Using your refrigerator

Led Indicators And Control
Panel
LED indicators in the front section of
your refrigerator are intended to help
you in monitoring the operation of your
appliance.
Keep your food in the refrigerator in a
safe manner by monitoring and using
these LEDs and controls as explained
below:
Quick Cool Button (1):
Used to cool the food quickly.
Compressor may
immediately but after some time when
the button is pressed and this is quite
normal.
Thermostat Setting Button (2):
Used to set your refrigerator between
minimum and maximum values.
Temperature Indicator (3):
Displays the inner temperature of your
refrigerator.
not operate
19
Amber LED (4):
Lights up when the Quick Cool
button on the LED panel is pressed.
In this case, your refrigerator operates
continuously.
Press the button again when the food
you would like to quick cool comes to
the desired temperature and the orange
LED will turn off.
Green LED (5):
Lights up continuously after plugging
in your refrigerator.
Red LED (6):
It warns you by lighting up continuously
when your refrigerator starts to operate,
if not enough cooling effect is obtained,
when the door of your refrigerator
remains open for a long time and when
excessive food is loaded.
If the red LED lights up continuously
when the conditions stated in the
adjacent column do not exist, then call
our Authorised Service.
EN