Replacing A Gas Extinguishing Controller - Huawei IDS1000 User Manual

IDS1000 Container Data Center
User Manual

7.10 Replacing a Gas Extinguishing Controller

Prerequisites


Tools and Materials






Impact on the System
None
Procedure
Step 1 Open the door of gas extinguishing controller using a key.
Step 2 Power off the gas extinguishing controller.
Step 3 Open the gas extinguishing controller and make a note of the cable connection.
Step 4 Remove the cables and gas extinguishing controller.
Step 5 Install the new gas extinguishing controller and connect the cables.
Step 6 Switch on the circuit breaker for the fire extinguishing controller.
Step 7 Verify that the fire extinguishing controller is working properly and lock the door.
----End
Follow-up Procedure
Send the faulty fire extinguishing controller together with a Repair Notice to your local
Huawei office for repair.
Issue 01 (2014-3-15)
A gas extinguishing controller is faulty.
Spare gas extinguishing controllers are available.
Diagonal pliers
PVC insulation tape
Spare gas extinguishing controllers
Documents delivered with the gas extinguishing controller
Gloves
Key to the gas extinguishing controller
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Parts Replacement
55