Installing PGND Cable
Earth connection essential before connecting supply.
1
1
Loosen the grounding screw.
3
3
Fasten the grounding screw.
When the EGW2100 is directly placed on a clean workbench, if there is no independent grounding terminal on the
workbench to connect the PGND cable, make sure that the grounding point of the power supply is properly
grounded.
2
2
Aim one end of the PGND cable (the ring
terminal with an smaller inner diameter) at
the grounding hole.
4
4
Connect the other end of the PGND cable (the
ring terminal with an larger inner diameter) to
the grounding terminal on the cabinet.
7