Table of Contents
Advertisement
Installing Antennas
The WiFi antennas and 3G antennas are installed in the same way. The following takes the 3G antennas as an example to
illustrate the process of installing antennas.
The WiFi antennas and 3G antennas cannot be misused.
The WiFi antenna connectors does not have a protection cap. Step 1 is not needed during the installation
of the WiFi antenna.
1
1
Take out the protective cap of the 3G antenna
connectors on the 3G interface card.
3
3
Adjust the 3G antennas to make them straight and
upward.
2
2
Fix the 3G antennas on the connectors on the rear
panel of EGW2100.
4
4
The above shows the antennas are installed.
10
Advertisement
Table of Contents
