Table of Contents
Advertisement
c
Installing Rack-Mounting Ears on Both Sides of the Chassis
1
Align the rack-mounting ear and one side of the chassis.
2
Clockwise fasten the M4 screw.
d
Fixing the Device into the Cabinet
The cool wind of the EGW2100 comes in from right and goes out from left. When the EGW2100 is installed in the
same cabinet with the device for generating the cool wind coming in from left and going out from right, there should be
certain distance between the two devices to avoid circulation of the hot wind.
1
2
2
6
1
Put the EGW2100
on the slide rails.
Then push it into
the cabinet.
2
Fasten four M6
screws on both
sides of the
chassis to fix
the rack-
mounting ears
into the cabinet.
Advertisement
Table of Contents
