Table of Contents
Advertisement
2
Installing the Device in the Cabinet
a
Installing Slide Rails
Fix slide rails on the left and right sides of the cabinet with M5 screws. The following takes the installation on the left side as
an example. The lower edge of the slide rail and the narrow brim of the cabinet mount bar must be aligned.
Broad brim
Broad brim
Narrow brim
b
Installing Captive Nuts
Install the captive nuts on both sides of the cabinet.
1
3
1
1
Decide the installation positions are the first
and third square holes counted from the
lower edge of the slide rail.
3
3
Pull the other foot of the captive nut with the
mount bar until it is clipped on the upper boarder
of the square hole.
2
2
Install one foot of the captive nut into the square
hole from the inside of the cabinet. Secure it on
the lower boarder of the square hole.
4
4
The above shows the captive nut is installed.
5
Advertisement
Table of Contents
