Power Consumption - Huawei MU709 Series Hardware Manual

HUAWEI MU709 Series HSPA+ LGA Module
Hardware Guide

5.4.2 Power Consumption

The power consumption in different scenarios are respectively listed in Table 5-5 to
Table 5-9 .
The power consumption listed in this section is tested when the power supply is
normal voltage (3.8 V) and all of Test values are measured at room temperature.
Table 5-5 Averaged power off DC power consumption
Description
Power off
Table 5-6 Averaged standby DC power consumption
Description
Sleep HSPA/WCDMA
GPRS/EDGE
Idle HSPA/WCDMA
GPRS/EDGE
Issue 09 (2017-12-15)
Test Value (Unit: µA)
Typical
30
Bands Test Value (Unit: mA)
UMTS bands 2.7
GSM bands 2.4
UMTS bands 50
GSM bands 50
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Electrical and Reliability Features
Notes/Configuration
Normal voltage (3.8 V) is ON while
power on event is not triggered.
Notes/Configuration
Typical
Module is powered up
DRX cycle=7 (1.28s)
Module is registered on the
network.
USB is in suspend.
Module is powered up
MFRMS=5 (1.175s)
Module is registered on the
network.
USB is in suspend.
Module is powered up
DRX cycle=7 (1.28s)
Module is registered on the
network, no data is
transmitted
USB is in active.
Module is powered up
MFRMS=5 (1.175s)
Module is registered on the
network.
no data is transmitted
USB is in active.
56