Connecting The Paired Device; Unpairing; Visibility Setting; Figure 6-26 Unpairing A Device - NEC Univerge SV9100 System Hardware Manual

Issue 2.0
Figure 6-25 Connecting the Paired Device

Figure 6-26 Unpairing a Device

SV9100 System Hardware Manual
3.1.2.4

Connecting the Paired Device

Enable the Bluetooth device. Select [2 Enable] in the Connect
screen.
3.1.2.5

Unpairing

To unpair a paired the Bluetooth device, select the device in the
[Delete] screen.
3.1.2.6

Visibility Setting

Set to Disable (default: [1. Disable]).

Figure 6-27 Setting Visibility Option

After pairing a Bluetooth device, be sure to
configure its connection to enable it. If settings
are not completed, the Bluetooth device that does
CAUTION
the pairing cannot be used.
6-19