Gpz-2Bria (2 Basic Rate Interface Daughter Board); Description - NEC Univerge SV9100 System Hardware Manual

Hide thumbs Also See for Univerge SV9100:

Table of Contents

Figure 4-22 Installing the GPZ-2BRIA Daughter Board

GPZ-2BRIA (2 Basic Rate Interface Daughter Board)

This daughter board provides two BRI circuits and is installed on the

GCD-2BRIA blade. This board provides:

Two (GCD-2BRIA) 2-Channel Circuits (2B + D) configured as T-Bus

64Kb/s Clear B-Channel and 16Kb/s D-Channel

Connection point for GCD-2BRIA

Connection point for GCD-LTA

These trunk circuits can be connected to ISDN trunks or ISDN telephones,

depending on the switch setting in system programming. All ISDN

telephone circuits [#1-2 (BRI blade) and #3-4 (with the BRI daughter board)]

are supplied DC power from the UNIVERGE SV9100 system.

System programming must be used to block new calls on the blade. This

program prevents new calls from being established on the blade, but does

not terminate any existing call.

Installing the SV9100 Blades